King
KDS Combination Waterstone, 1000 / 6000 Grit
Soaking combination stone with a working side and a polishing side — the usual first stone.
KDS-1000-6000 · Each
$62.00 In stock
Photography shows the tool type. Studio shots of this exact part are being added — call us if you need to see the actual item before ordering.
T-8 Water-Cooled Sharpening System
Slow wet grinder with a jig system that makes an edge angle repeatable across a whole set.
- Part number
- T-8
- Sold as
- Each
- Made in
- Sweden
$1,049.00 MSRP · taxes calculated at checkout
Special order — 3–5 weeks
- Dispatched in 1–2 business days · free over $149.00
- 30-day returns, unused and in original packaging
- Questions? (000) 000-0000 or sales@exelprod.com
The wheel turns at 90 rpm in a water bath. At that speed the edge cannot get hot, so there is no risk of drawing the temper back the way a dry bench grinder does in seconds.
The real value is the jig system rather than the machine. Once a jig is set for an angle, every subsequent tool comes off matching — the twentieth chisel is identical to the first. For a shop maintaining a set of edge tools that repeatability is the whole argument.
Supplied with the straight-edge jig, the angle setter, honing compound and the leather stropping wheel. The specialist jigs for gouges, axes and turning tools are separate.
| Wheel speed | 90 rpm |
|---|---|
| Grindstone | 250 mm × 50 mm, graded 220–1000 |
| Honing wheel | 220 mm leather strop |
| Motor | Industrial AC, continuous duty |
| Cooling | Water bath — edge cannot overheat |
| Supplied with | SE-77 square edge jig, WM-200 angle master, PA-70 honing compound |
| Machine weight | 14.4 kg |
| Part number | T-8 |
| Weight | 14.4 kg |
| Country of manufacture | Sweden |
| Standards & certifications | CE |
Specifications are published as supplied by the manufacturer. If anything here conflicts with the maker’s current data sheet, tell us and we will correct it.
What is covered
Seven-year warranty on the machine when used in a non-industrial setting. Grindstone and leather wheel are consumables.
Limitations
Warranty covers defects in material and manufacture only. It does not cover normal wear, consumable items, corrosion, or damage caused by using a tool outside its stated capacity or for a purpose it is not designed for. Where a product page states a specific exclusion, that exclusion applies.
Making a claim
Contact us at support@exelprod.com or (000) 000-0000 with your order number and a photograph of the fault. We handle the claim with the manufacturer on your behalf; you do not deal with them directly.
This warranty is in addition to, and does not affect, your statutory rights. Full terms are on our warranty page.
Dispatch
In-stock items are dispatched within 1–2 business days of order. Orders placed before 14:00 ET on a business day are picked the same day. This item is a special order with a lead time of 3–5 weeks; it is ordered from the maker on receipt of your order.
Carriers
We ship with Canada Post, UPS, Purolator. Delivery is free on orders over $149.00; below that a flat rate of $14.95 applies. Tracking is emailed when the label is created.
Returns
Unused items in original packaging may be returned within 30 days. Sharpening stones that have been wetted, abrasives that have been opened, and saw blades removed from their sleeve cannot be returned for hygiene and condition reasons unless faulty.
Also in Sharpening
Related products
Suehiro
Cerax 1000 Waterstone
Hard-bonded ceramic stone that cuts fast and holds flat far longer than a soft stone.
CX-1000 · Each
$78.00 In stock
Shapton
Glass Stone HR 1000
Thin abrasive layer bonded to a glass plate — splash and go, stays flat.
GS-1000HR · Each
$105.00 Special order — 3–4 weeks
Naniwa
Chosera 800 Waterstone
Magnesia-bonded stone with fast cut and tight grit consistency.
SS-800 · Each
$138.00 Special order — 3–4 weeks